Course Overview
This course is designed for individuals who require the knowledge and practical skills to operate a 360° Excavator as a crane.
Course Objectives
Participants will develop competency in the following areas:
- Have a basic understanding of the industry, the dangers of working in the industry and their responsibilities as an operator
- Be able to conform to manufacturers requirements as per technical data, conform to relevant regulations and legislation
- Be able to locate and identify the major components of the machine and explain their functions
- Be able to locate and identify steering, driving and braking controls and explain their functions
- Safely mount and dismount the machine
- Start and stop the engine and safely move the machine off and stop it safely
- Configure the machine for travel and manoeuvre it safely across varying terrain in open and confined areas
- Conduct all necessary safety checks at the work area
- Be able to locate, identify and explain safe working loads, lifting capacity chart and explain different lifting configurations and working ranges
- Identify and explain different lifting procedures, explain what task could fall into each category
- Identify and explain centres of gravity, calculate estimated weights of loads
- Identify any overhead / proximity hazards
- Be able to agree the signal codes / hand signals, direction of movement, safe working and safe landing, placement zone with the slinger / signaller
- Ensure excavator is in a safe condition for attachments to be fitted
- Checked load integrity and security by carrying out trial lift ➢ Be able to lift and move a load to a designated position in a safe and controlled manner ensuring minimum uncontrolled movement
- Environmental considerations
- Carry out all out of service and securing procedures
Duration
1 – 5 days depending on experience
Already have an NPORS 360 excavator qualification? Add this bolt on in 2 days.
Maximum Delegates
3 novice or 6 Exp Tests
Entry Requirements
Good understanding of spoken and written English.
Card options*
NPORS Traditional Operator Card (Non-CSCS)
- Best for operators working in non-construction sectors where a CSCS logo card is not required.
- We standardly issue cards for 3 years but can issue cards for 5 years on request
- Companies can choose to have the cards restricted to just for their company use on request
NPORS/CSCS Card Route (Construction)
- For operators working on construction sites where a CSCS logo card is required.
- You will need a valid NPORS or CITB HS&E touchscreen test dated within 2 years of application
NPORS/CSCS Red Trained Operator Card (2 years)
- For operators who do not yet hold the required (S)NVQ.
- You will need a valid NPORS or CITB HS&E touchscreen test dated within 2 years of application
- During the 2-year card period you must:
- Register for and achieve the required (S)NVQ before renewal/upgrade
NPORS/CSCS Competent Operator Card (5 years)
- For operators who already hold the required (S)NVQ
- You will need a valid NPORS or CITB HS&E touchscreen test dated within 2 years of application
- The required (S)NVQ for the category
*Some categories are only eligible for traditional cards or certificates