Course Overview
This course is designed for individuals who require the knowledge and practical skills to safely operate MEWP Scissor
Course Objectives
Participants will develop competency in the following areas:
- Demonstrate a basic understanding of the industry and their roles and responsibilities as an operator
- Demonstrate a working knowledge of the manufacturer’s handbook
- Locate and identify the major components and controls of the machine and explain their functions
- Demonstrate an understanding of loading/unloading procedure for machine transport
- Conduct all pre-operation checks
- Check all emergency lowering functions
- Conduct all necessary safety checks at the work area
- Safely mount and dismount the machine
- Configure the machine for travel then move off and stop safely
- Manoeuvre the machine safely, on level ground and slight inclines, in open and confined areas
- Travel with the platform raised (where applicable)
- Set the machine up safely onto the stabilisers (where applicable)
- Carry out accessing tasks up to the full operating height
- Use the platform extension section
- Carry out all end of shift and shut down procedures.
Duration
1 day
Maximum Delegates
4 novice or 6 Exp Tests
Entry Requirements
Good understanding of spoken and written English.
Card options*
NPORS Traditional Operator Card (Non-CSCS)
- Best for operators working in non-construction sectors where a CSCS logo card is not required.
- We standardly issue cards for 3 years but can issue cards for 5 years on request
- Companies can choose to have the cards restricted to just for their company use on request
NPORS/CSCS Card Route (Construction)
- For operators working on construction sites where a CSCS logo card is required.
- You will need a valid NPORS or CITB HS&E touchscreen test dated within 2 years of application
NPORS/CSCS Red Trained Operator Card (2 years)
- For operators who do not yet hold the required (S)NVQ.
- You will need a valid NPORS or CITB HS&E touchscreen test dated within 2 years of application
- During the 2-year card period you must:
- Register for and achieve the required (S)NVQ before renewal/upgrade
NPORS/CSCS Competent Operator Card (5 years)
- For operators who already hold the required (S)NVQ
- You will need a valid NPORS or CITB HS&E touchscreen test dated within 2 years of application
- The required (S)NVQ for the category
*Some categories are only eligible for traditional cards or certificates